all
This commit is contained in:
BIN
TExaS/.DS_Store
vendored
Normal file
BIN
TExaS/.DS_Store
vendored
Normal file
Binary file not shown.
21
TExaS/.ccsproject
Normal file
21
TExaS/.ccsproject
Normal file
@@ -0,0 +1,21 @@
|
||||
<?xml version="1.0" encoding="UTF-8" ?>
|
||||
<?ccsproject version="1.0"?>
|
||||
<projectOptions>
|
||||
<ccsVersion value="12.3.0"/>
|
||||
<deviceVariant value="Cortex M.MSPM0G3507"/>
|
||||
<deviceFamily value="TMS470"/>
|
||||
<deviceEndianness value="little"/>
|
||||
<codegenToolVersion value="TICLANG_2.1.3.LTS"/>
|
||||
<isElfFormat value="true"/>
|
||||
<connection value="common/targetdb/connections/TIXDS110_Connection.xml"/>
|
||||
<rts value=""/>
|
||||
<createSlaveProjects value=""/>
|
||||
<ignoreDefaultDeviceSettings value="true"/>
|
||||
<ignoreDefaultCCSSettings value="true"/>
|
||||
<templateProperties value="id=gpio_toggle_output_LP_MSPM0G3507_nortos_ticlang.projectspec.gpio_toggle_output_LP_MSPM0G3507_nortos_ticlang,buildProfile=release,isHybrid=true"/>
|
||||
<sourceLookupPath value="${COM_TI_MSPM0_SDK_INSTALL_DIR}/source/ti/driverlib"/>
|
||||
<origin value="C:\ti\mspm0_sdk_1_00_01_03\examples\nortos\LP_MSPM0G3507\driverlib\gpio_toggle_output\ticlang\gpio_toggle_output_LP_MSPM0G3507_nortos_ticlang.projectspec"/>
|
||||
<filesToOpen value="gpio_toggle_output.syscfg,README.md"/>
|
||||
<isTargetManual value="false"/>
|
||||
<activeTargetConfiguration value="targetConfigs/MSPM0G3507.ccxml"/>
|
||||
</projectOptions>
|
||||
11
TExaS/.clangd
Normal file
11
TExaS/.clangd
Normal file
@@ -0,0 +1,11 @@
|
||||
# This is an auto-generated file - do not add it to source-control
|
||||
|
||||
CompileFlags:
|
||||
CompilationDatabase: Debug/.clangd
|
||||
|
||||
Diagnostics:
|
||||
Suppress: '*'
|
||||
|
||||
InlayHints:
|
||||
Enabled: No
|
||||
|
||||
104
TExaS/.cproject
Normal file
104
TExaS/.cproject
Normal file
@@ -0,0 +1,104 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
|
||||
<storageModule moduleId="org.eclipse.cdt.core.settings">
|
||||
<cconfiguration id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1353749893">
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1353749893" moduleId="org.eclipse.cdt.core.settings" name="Debug">
|
||||
<externalSettings/>
|
||||
<extensions>
|
||||
<extension id="com.ti.ccstudio.binaryparser.CoffParser" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="com.ti.ccs.project.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GASErrorParser" point="com.ti.ccs.project.ErrorParser"/>
|
||||
<extension id="com.ti.ccs.errorparser.SysConfigErrorParser" point="com.ti.ccs.project.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="com.ti.ccs.project.ErrorParser"/>
|
||||
<extension id="com.ti.ccs.errorparser.CompilerErrorParser_TI" point="com.ti.ccs.project.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="com.ti.ccstudio.errorparser.CoffErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="com.ti.ccstudio.errorparser.SysConfigErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
</extensions>
|
||||
</storageModule>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1353749893" name="Debug" parent="com.ti.ccstudio.buildDefinitions.TMS470.Debug">
|
||||
<folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Debug.1353749893." name="/" resourcePath="">
|
||||
<toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.DebugToolchain.1751151872" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.linkerDebug.392250963">
|
||||
<option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.2044864321" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
|
||||
<listOptionValue value="DEVICE_CONFIGURATION_ID=Cortex M.MSPM0G3507"/>
|
||||
<listOptionValue value="DEVICE_CORE_ID=CORTEX_M0P"/>
|
||||
<listOptionValue value="DEVICE_ENDIANNESS=little"/>
|
||||
<listOptionValue value="OUTPUT_FORMAT=ELF"/>
|
||||
<listOptionValue value="LINKER_COMMAND_FILE=mspm0g3507.cmd"/>
|
||||
<listOptionValue value="RUNTIME_SUPPORT_LIBRARY="/>
|
||||
<listOptionValue value="CCS_MBS_VERSION=6.1.3"/>
|
||||
<listOptionValue value="PRODUCTS=MSPM0-SDK:2.9.0.01;sysconfig:1.26.0;"/>
|
||||
<listOptionValue value="PRODUCT_MACRO_IMPORTS={"MSPM0-SDK":["${COM_TI_MSPM0_SDK_INCLUDE_PATH}","${COM_TI_MSPM0_SDK_LIBRARY_PATH}","${COM_TI_MSPM0_SDK_LIBRARIES}","${COM_TI_MSPM0_SDK_SYMBOLS}","${COM_TI_MSPM0_SDK_SYSCONFIG_MANIFEST}"],"sysconfig":["${SYSCONFIG_TOOL_INCLUDE_PATH}","${SYSCONFIG_TOOL_LIBRARY_PATH}","${SYSCONFIG_TOOL_LIBRARIES}","${SYSCONFIG_TOOL_SYMBOLS}","${SYSCONFIG_TOOL_SYSCONFIG_MANIFEST}"]}"/>
|
||||
<listOptionValue value="OUTPUT_TYPE=executable"/>
|
||||
</option>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.1879899105" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="TICLANG_4.0.4.LTS" valueType="string"/>
|
||||
<targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.targetPlatformDebug.509902639" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.targetPlatformDebug"/>
|
||||
<builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.builderDebug.1474785090" name="GNU Make.Debug" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.builderDebug"/>
|
||||
<tool id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.compilerDebug.1525208381" name="Arm Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.compilerDebug">
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.MARCH.1840400945" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.MARCH" value="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.MARCH.thumbv6m" valueType="enumerated"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.MCPU.2005685331" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.MCPU" value="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.MCPU.cortex-m0plus" valueType="enumerated"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.MFLOAT_ABI.165803970" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.MFLOAT_ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.MFLOAT_ABI.soft" valueType="enumerated"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.ENDIAN_NESS__BIG_LITTLE.559673839" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.ENDIAN_NESS__BIG_LITTLE" value="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.ENDIAN_NESS__BIG_LITTLE.MLITTLE_ENDIAN" valueType="enumerated"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.SELECT_PROCESSOR_MODE__ARM_THUMB.1635859064" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.SELECT_PROCESSOR_MODE__ARM_THUMB" value="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.SELECT_PROCESSOR_MODE__ARM_THUMB.MTHUMB" valueType="enumerated"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.OPT_LEVEL.2035712685" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.OPT_LEVEL.0" valueType="enumerated"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.INCLUDE_PATH.1557457519" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.INCLUDE_PATH" valueType="includePath">
|
||||
<listOptionValue value="${COM_TI_MSPM0_SDK_INCLUDE_PATH}"/>
|
||||
<listOptionValue value="${SYSCONFIG_TOOL_INCLUDE_PATH}"/>
|
||||
<listOptionValue value="${PROJECT_ROOT}"/>
|
||||
<listOptionValue value="${PROJECT_ROOT}/${ConfigName}"/>
|
||||
<listOptionValue value="${COM_TI_MSPM0_SDK_INSTALL_DIR}/source/third_party/CMSIS/Core/Include"/>
|
||||
<listOptionValue value="${COM_TI_MSPM0_SDK_INSTALL_DIR}/source"/>
|
||||
</option>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.DEFINE.159281898" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.DEFINE" valueType="definedSymbols">
|
||||
<listOptionValue value="${COM_TI_MSPM0_SDK_SYMBOLS}"/>
|
||||
<listOptionValue value="${SYSCONFIG_TOOL_SYMBOLS}"/>
|
||||
<listOptionValue value="__MSPM0G3507__"/>
|
||||
</option>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.GENERATE_DWARF_DEBUG.762661245" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.GENERATE_DWARF_DEBUG" value="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.compilerID.GENERATE_DWARF_DEBUG.GDWARF_3" valueType="enumerated"/>
|
||||
</tool>
|
||||
<tool id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.linkerDebug.392250963" name="Arm Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.exe.linkerDebug">
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.MAP_FILE.929769889" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.MAP_FILE" value="${ProjName}.map" valueType="string"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.OUTPUT_FILE.813367248" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.OUTPUT_FILE" value="${ProjName}.out" valueType="string"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.STACK_SIZE.843488014" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.STACK_SIZE" value="512" valueType="string"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.LIBRARY.1392855255" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.LIBRARY" valueType="libs">
|
||||
<listOptionValue value="${COM_TI_MSPM0_SDK_LIBRARIES}"/>
|
||||
<listOptionValue value="${SYSCONFIG_TOOL_LIBRARIES}"/>
|
||||
<listOptionValue value="${COM_TI_MSPM0_SDK_INSTALL_DIR}/source/ti/driverlib/lib/ticlang/m0p/mspm0g1x0x_g3x0x/driverlib.a"/>
|
||||
<listOptionValue value="libc.a"/>
|
||||
</option>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.SEARCH_PATH.2082389319" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.SEARCH_PATH" valueType="libPaths">
|
||||
<listOptionValue value="${COM_TI_MSPM0_SDK_LIBRARY_PATH}"/>
|
||||
<listOptionValue value="${SYSCONFIG_TOOL_LIBRARY_PATH}"/>
|
||||
<listOptionValue value="${PROJECT_BUILD_DIR}/syscfg"/>
|
||||
<listOptionValue value="${CG_TOOL_ROOT}/lib"/>
|
||||
</option>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.REREAD_LIBS.1147725254" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.REREAD_LIBS" value="false" valueType="boolean"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.DIAG_WRAP.1469492484" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.DISPLAY_ERROR_NUMBER.1956175205" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
|
||||
<option id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.XML_LINK_INFO.756417418" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.linkerID.XML_LINK_INFO" value="${ProjName}_linkInfo.xml" valueType="string"/>
|
||||
</tool>
|
||||
<tool id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.hex.619912134" name="Arm Hex Utility" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.hex"/>
|
||||
<tool id="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.objcopy.176014937" name="Arm Objcopy Utility" superClass="com.ti.ccstudio.buildDefinitions.TMS470_TICLANG_4.0.objcopy"/>
|
||||
<tool id="com.ti.ccstudio.buildDefinitions.sysConfig.664144450" name="SysConfig" superClass="com.ti.ccstudio.buildDefinitions.sysConfig">
|
||||
<option id="com.ti.ccstudio.buildDefinitions.sysConfig.PRODUCTS.1457453747" superClass="com.ti.ccstudio.buildDefinitions.sysConfig.PRODUCTS" valueType="stringList">
|
||||
<listOptionValue value="${COM_TI_MSPM0_SDK_SYSCONFIG_MANIFEST}"/>
|
||||
<listOptionValue value="${SYSCONFIG_TOOL_SYSCONFIG_MANIFEST}"/>
|
||||
</option>
|
||||
</tool>
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
|
||||
</cconfiguration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<project id="gpio_toggle_output_LP_MSPM0G3507_nortos_ticlang.com.ti.ccstudio.buildDefinitions.TMS470.ProjectType.348798676" name="TMS470" projectType="com.ti.ccstudio.buildDefinitions.TMS470.ProjectType"/>
|
||||
</storageModule>
|
||||
<storageModule moduleId="scannerConfiguration"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
|
||||
</cproject>
|
||||
49
TExaS/.project
Normal file
49
TExaS/.project
Normal file
@@ -0,0 +1,49 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<projectDescription>
|
||||
<name>TExaS</name>
|
||||
<comment></comment>
|
||||
<projects>
|
||||
</projects>
|
||||
<buildSpec>
|
||||
<buildCommand>
|
||||
<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
|
||||
<arguments>
|
||||
</arguments>
|
||||
</buildCommand>
|
||||
<buildCommand>
|
||||
<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
|
||||
<triggers>full,incremental,</triggers>
|
||||
<arguments>
|
||||
</arguments>
|
||||
</buildCommand>
|
||||
</buildSpec>
|
||||
<natures>
|
||||
<nature>com.ti.ccstudio.core.ccsNature</nature>
|
||||
<nature>org.eclipse.cdt.core.cnature</nature>
|
||||
<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
|
||||
<nature>org.eclipse.cdt.core.ccnature</nature>
|
||||
<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
|
||||
</natures>
|
||||
<linkedResources>
|
||||
<link>
|
||||
<name>Clock.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/inc/Clock.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>LaunchPad.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/inc/LaunchPad.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>TExaS.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/inc/TExaS.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Timer.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/inc/Timer.c</locationURI>
|
||||
</link>
|
||||
</linkedResources>
|
||||
</projectDescription>
|
||||
3
TExaS/.settings/org.eclipse.cdt.codan.core.prefs
Normal file
3
TExaS/.settings/org.eclipse.cdt.codan.core.prefs
Normal file
@@ -0,0 +1,3 @@
|
||||
eclipse.preferences.version=1
|
||||
inEditor=false
|
||||
onBuild=false
|
||||
32
TExaS/Debug/.clangd/compile_commands.json
Normal file
32
TExaS/Debug/.clangd/compile_commands.json
Normal file
@@ -0,0 +1,32 @@
|
||||
[
|
||||
{
|
||||
"directory" : "/Users/adipu/lab-7-tweinstein-1/TExaS/Debug",
|
||||
"command" : "clang++ -I\"/Users/adipu/lab-7-tweinstein-1/TExaS\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source/third_party/CMSIS/Core/Include\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source\" -D__MSPM0G3507__ -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/armv7em-ti-none-eabihf/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/lib/clang/18/include\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug/syscfg\" -xc",
|
||||
"file" : "/Users/adipu/lab-7-tweinstein-1/inc/Clock.c"
|
||||
},
|
||||
{
|
||||
"directory" : "/Users/adipu/lab-7-tweinstein-1/TExaS/Debug",
|
||||
"command" : "clang++ -I\"/Users/adipu/lab-7-tweinstein-1/TExaS\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source/third_party/CMSIS/Core/Include\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source\" -D__MSPM0G3507__ -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/armv7em-ti-none-eabihf/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/lib/clang/18/include\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug/syscfg\" -xc",
|
||||
"file" : "/Users/adipu/lab-7-tweinstein-1/inc/LaunchPad.c"
|
||||
},
|
||||
{
|
||||
"directory" : "/Users/adipu/lab-7-tweinstein-1/TExaS/Debug",
|
||||
"command" : "clang++ -I\"/Users/adipu/lab-7-tweinstein-1/TExaS\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source/third_party/CMSIS/Core/Include\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source\" -D__MSPM0G3507__ -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/armv7em-ti-none-eabihf/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/lib/clang/18/include\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug/syscfg\" -xc",
|
||||
"file" : "/Users/adipu/lab-7-tweinstein-1/inc/TExaS.c"
|
||||
},
|
||||
{
|
||||
"directory" : "/Users/adipu/lab-7-tweinstein-1/TExaS/Debug",
|
||||
"command" : "clang++ -I\"/Users/adipu/lab-7-tweinstein-1/TExaS\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source/third_party/CMSIS/Core/Include\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source\" -D__MSPM0G3507__ -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/armv7em-ti-none-eabihf/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/lib/clang/18/include\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug/syscfg\" -xc",
|
||||
"file" : "/Users/adipu/lab-7-tweinstein-1/TExaS/TExaSTestmain.c"
|
||||
},
|
||||
{
|
||||
"directory" : "/Users/adipu/lab-7-tweinstein-1/TExaS/Debug",
|
||||
"command" : "clang++ -I\"/Users/adipu/lab-7-tweinstein-1/TExaS\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source/third_party/CMSIS/Core/Include\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source\" -D__MSPM0G3507__ -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/armv7em-ti-none-eabihf/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/lib/clang/18/include\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug/syscfg\" -xc",
|
||||
"file" : "/Users/adipu/lab-7-tweinstein-1/inc/Timer.c"
|
||||
},
|
||||
{
|
||||
"directory" : "/Users/adipu/lab-7-tweinstein-1/TExaS/Debug",
|
||||
"command" : "clang++ -I\"/Users/adipu/lab-7-tweinstein-1/TExaS\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source/third_party/CMSIS/Core/Include\" -I\"/Applications/ti/mspm0_sdk_2_09_00_01/source\" -D__MSPM0G3507__ -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/armv7em-ti-none-eabihf/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c++/v1\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/lib/clang/18/include\" -isystem\"/Applications/ti/ccs2040/ccs/tools/compiler/ti-cgt-armllvm_4.0.4.LTS/include/c\" -I\"/Users/adipu/lab-7-tweinstein-1/TExaS/Debug/syscfg\" -xc",
|
||||
"file" : "/Users/adipu/lab-7-tweinstein-1/TExaS/ticlang/startup_mspm0g3507_ticlang.c"
|
||||
}
|
||||
]
|
||||
188
TExaS/README.html
Normal file
188
TExaS/README.html
Normal file
@@ -0,0 +1,188 @@
|
||||
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
|
||||
<html xmlns:v="urn:schemas-microsoft-com:vml"
|
||||
xmlns:o="urn:schemas-microsoft-com:office:office"
|
||||
xmlns:w="urn:schemas-microsoft-com:office:word"
|
||||
xmlns:m="http://schemas.microsoft.com/office/2004/12/omml"
|
||||
xmlns:st1="urn:schemas-microsoft-com:office:smarttags"
|
||||
xmlns="http://www.w3.org/TR/REC-html40">
|
||||
<head>
|
||||
<meta http-equiv="Content-Type"
|
||||
content="text/html; charset=windows-1252">
|
||||
<meta name="ProgId" content="Word.Document">
|
||||
<meta name="Generator" content="Microsoft Word 14">
|
||||
<meta name="Originator" content="Microsoft Word 14">
|
||||
<base target="_parent">
|
||||
<link rel="Edit-Time-Data" href="index_files/editdata.mso">
|
||||
<title>TExaS</title>
|
||||
<o:smarttagtype
|
||||
namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="place"></o:smarttagtype><o:smarttagtype
|
||||
namespaceuri="urn:schemas-microsoft-com:office:smarttags"
|
||||
name="PlaceName"></o:smarttagtype>
|
||||
<o:smarttagtype
|
||||
namespaceuri="urn:schemas-microsoft-com:office:smarttags"
|
||||
name="PlaceType"></o:smarttagtype>
|
||||
<link rel="themeData" href="index_files/themedata.thmx">
|
||||
<link rel="colorSchemeMapping"
|
||||
href="index_files/colorschememapping.xml">
|
||||
<style>
|
||||
</style>
|
||||
</head>
|
||||
<body style="background-color: white;" alink="#0000ff" lang="EN-US"
|
||||
link="blue" vlink="#c40026">
|
||||
<div class="WordSection1">
|
||||
<p style="text-align: center;" align="center"><span
|
||||
style="font-size: 18pt;">TExaS</span><br>
|
||||
<table class="MsoNormalTable"
|
||||
style="border: 3pt outset ; background: rgb(255, 204, 153) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; width: 100%;"
|
||||
border="1" cellpadding="0" width="100%">
|
||||
<tr>
|
||||
<td>
|
||||
<p><b><span style="font-size: 18pt;">Readme</b></span>
|
||||
<br> <br>
|
||||
This is a C language project that demonstrates the TExaS
|
||||
oscilloscope and the TExaS logic analyzer.
|
||||
Typically, you add <b>TExaS.c</b> to your project creating
|
||||
the scope or logic analyzer along side your application.
|
||||
This project simply demonstrates how to configure TExaS.
|
||||
Data are
|
||||
sent to the PC at 10 kHz using a low priority periodic interrupt and plotted using the
|
||||
Windows application <b>TExaSdisplay</b>.
|
||||
Using either the scope or logic analyzer will consume
|
||||
from 1 to 2% of the CPU time.
|
||||
The system uses <b>UART0</b> and <b>TIMG10</b>.
|
||||
The system can operate at either 32 or 48 MHz.
|
||||
You specify your bus frequency at initialization.
|
||||
|
||||
In the <b>TExaS.h</b> file you
|
||||
set <b>TEXAS_SCOPE=1</b> to create an 8-bit analog oscilloscope or
|
||||
set <b>TEXAS_SCOPE=0</b> to create a 7-bit digital logic analyzer.</p>
|
||||
<p>The scope uses either
|
||||
<b>ADC0</b> or <b>ADC1</b> depending on how you initialize.
|
||||
Any of the 16 analog pins on the MSPM0G3507 can be configured
|
||||
as the analog source. The ADC is set to continuously sample, but
|
||||
data are sent to the PC through UART0 only at 10 kHz. For example<br><br>
|
||||
<b><code>TExaS_Init(ADC0,TEXAS_48MHz,5); </code></b><br><br>
|
||||
will configure TExaS as a scope using ADC0 channel 5 (PB24), which
|
||||
is the microphone on the MKII booster. The following figure shows
|
||||
the scope trace displaying voltage versus time from the microphone.</p>
|
||||
<p class="PictureWide"><span lang="en-US"><img src="TExaSscope.png"
|
||||
></span></p>
|
||||
<p>The following figure shows
|
||||
the spectrum analyzer trace displaying amplitude versus frequency from the microphone.</p>
|
||||
<p class="PictureWide"><span lang="en-US"><img src="TExaSspectrumAnalyzer.png"
|
||||
></span></p>
|
||||
<p>
|
||||
The logic analyzer allows any 7 digital pins to be measured.
|
||||
Some options are predefined in <b>TExaS.h</b>.
|
||||
However, you can define other pin configuration by
|
||||
by defining your own <b>TEXAS_LOGIC</b> macro. This macro
|
||||
creates a 7-bit data value, adding bit 7 high.
|
||||
This value is sent to the PC through UART0 at 10 kHz.
|
||||
For example, the following configures logic analyzer for PB21,PA18,PB27,PB26,PB22,PA0.<br><br>
|
||||
<b><code>
|
||||
#define PAoutPin0Bit0 (GPIOA->DOUT31_0&1)<br>
|
||||
#define PBoutPin22Bit1 (((GPIOB->DOUT31_0&(1<<22))>>21))<br>
|
||||
#define PBoutPin26Bit2 (((GPIOB->DOUT31_0&(1<<26))>>24))<br>
|
||||
#define PBoutPin27Bit3 (((GPIOB->DOUT31_0&(1<<27))>>24))<br>
|
||||
#define PAinPin18Bit4 (((GPIOA->DIN31_0&(1<<18))>>14))<br>
|
||||
#define PBinPin21Bit5 (((GPIOB->DIN31_0&(1<<21))>>16))<br>
|
||||
#define TEXAS_LOGIC (0x80|PBinPin21Bit5|PAinPin18Bit4|PBoutPin27Bit3|PBoutPin26Bit2|PBoutPin22Bit1|PAoutPin0Bit0)
|
||||
</code></b><br><br>
|
||||
This 6-bit logic analyzer consumes about 2% of the CPU time.
|
||||
The following figure shows
|
||||
the logic analyzer trace displaying PB21,PA18,PB27,PB26,PB22,PA0 digital pins versus time.</p>
|
||||
<p class="PictureWide"><span lang="en-US"><img src="TExaSlogicAnalyzer.png"
|
||||
></span></p>
|
||||
<p>
|
||||
<br>
|
||||
Derived from Texas Instrument code
|
||||
<ul>
|
||||
<li>adc12_single_conversion_vref_internal_LP_MSPM0G3507_nortos_ticlang</li>
|
||||
<li>adc12_single_conversion_LP_MSPM0G3507_nortos_ticlang</li>
|
||||
</ul>
|
||||
|
||||
</td>
|
||||
|
||||
</tr>
|
||||
</table>
|
||||
</p>
|
||||
|
||||
<table class="MsoNormalTable"
|
||||
style="border: 3pt outset ; background: rgb(252, 243, 144) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; width: 100%;"
|
||||
border="1" cellpadding="0" width="100%">
|
||||
<tbody>
|
||||
<tr>
|
||||
<td>
|
||||
<p><b><span style="font-size: 18pt;">Hardware Required</b></span>
|
||||
<br>
|
||||
<ul>
|
||||
<li>MSPM0G3507 LaunchPad™ Development Kit (LP-MSPM0G3507)</li>
|
||||
<li>Educational BoosterPack MKII (BOOSTXL-EDUMKII)</li>
|
||||
</ul>
|
||||
<b><span style="font-size: 18pt;">Pin assignments</b></span>
|
||||
<br>
|
||||
<ul>
|
||||
<li>Digital Input: PA26 is MKII joystick Select button </li>
|
||||
<li>Analog Input: PA25 is MKII joystick horizontal (X) PA25_ADC0.2</li>
|
||||
<li>Analog Input: PA18 is MKII joystick vertical (Y) PA18_ADC1.3</li>
|
||||
<li>Analog Input: MKII is accelerometer X PB19__ADC1.6</li>
|
||||
<li>Analog Input: MKII is accelerometer Y PA22__ADC0.7</li>
|
||||
<li>Analog Input: MKII is accelerometer Z PB18__ADC1.5</li>
|
||||
<li>Output: PA0 is red LED1, index 0 in IOMUX PINCM table</li>
|
||||
<li>Output: PB22 is blue LED2, index 49 in IOMUX PINCM table</li>
|
||||
<li>Output: PB26 is red LED2, index 56 in IOMUX PINCM table</li>
|
||||
<li>Output: PB27 is green LED2, index 57 in IOMUX PINCM table</li>
|
||||
<li>Input: PA18 is S2 positive logic switch, index 39 in IOMUX PINCM table</li>
|
||||
<li>Input: PB21 is S3 negative logic switch, index 48 in IOMUX PINCM table</li>
|
||||
</ul>
|
||||
<b><span style="font-size: 18pt;">LaunchPad Jumpers</b></span>
|
||||
<br>
|
||||
<ul>
|
||||
<li>Remove J16 J17 J18: Disconnects light sensor from the microcontroller PA22 PA27 PA26</li>
|
||||
<li>J4: Connects PA0 to red LED</li>
|
||||
<li>J5: Connects PB22 to blue LED2</li>
|
||||
<li>J6: Connects PB26 to red LED2</li>
|
||||
<li>J7: Connects PB27 to green LED2</li>
|
||||
</ul>
|
||||
</p> </td>
|
||||
</tr>
|
||||
</tbody>
|
||||
</table>
|
||||
|
||||
</body>
|
||||
</html>
|
||||
<p>
|
||||
Simplified BSD License (FreeBSD License)
|
||||
Copyright © 2023, Jonathan Valvano, All rights reserved.<br>
|
||||
<br>
|
||||
Redistribution and use in source and binary forms, with or without modification,
|
||||
are permitted provided that the following conditions are met:<br>
|
||||
<ol>
|
||||
<li>Redistributions of source code must retain the above copyright notice,
|
||||
this list of conditions and the following disclaimer.</li>
|
||||
<li>Redistributions in binary form must reproduce the above copyright notice,
|
||||
this list of conditions and the following disclaimer in the documentation
|
||||
and/or other materials provided with the distribution.</li></ol>
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
||||
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
||||
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.<br>
|
||||
<br>
|
||||
The views and conclusions contained in the software and documentation are
|
||||
those of the authors and should not be interpreted as representing official
|
||||
policies, either expressed or implied, of the FreeBSD Project.
|
||||
<br>
|
||||
</p>
|
||||
<p>For more information, see <a href="http://users.ece.utexas.edu/~valvano/">
|
||||
http://users.ece.utexas.edu/~valvano/</a>.
|
||||
</p>
|
||||
</div>
|
||||
</body>
|
||||
</html>
|
||||
65
TExaS/TExaSTestmain.c
Normal file
65
TExaS/TExaSTestmain.c
Normal file
@@ -0,0 +1,65 @@
|
||||
/* TExaSTestmain.c
|
||||
* Jonathan Valvano
|
||||
* August 8, 2023
|
||||
* Derived
|
||||
* Derived from adc12_single_conversion_vref_internal_LP_MSPM0G3507_nortos_ticlang
|
||||
* adc12_single_conversion_LP_MSPM0G3507_nortos_ticlang
|
||||
*/
|
||||
// Educational BoosterPack MKII (BOOSTXL-EDUMKII)
|
||||
// Analog MKII Joystick
|
||||
// J1.5 joystick Select button (digital) PA26
|
||||
// J1.2 joystick horizontal (X) (analog) PA25_ADC0.2
|
||||
// J3.26 joystick vertical (Y) (analog) PA18_ADC1.3
|
||||
|
||||
// MKII accelerometer
|
||||
// J3.23 accelerometer X (analog) PB19__ADC1.6
|
||||
// J3.24 accelerometer Y (analog) PA22__ADC0.7
|
||||
// J3.25 accelerometer Z (analog) PB18__ADC1.5
|
||||
|
||||
// PB24 ADC0 channel 5 J1.6 MKII microphone in
|
||||
|
||||
#include <ti/devices/msp/msp.h>
|
||||
#include "../inc/LaunchPad.h"
|
||||
#include "../inc/Clock.h"
|
||||
#include "../inc/TExaS.h"
|
||||
// PA0 is red LED1, index 0 in IOMUX PINCM table
|
||||
// PB22 is BLUE LED2, index 49 in IOMUX PINCM table
|
||||
// PB26 is RED LED2, index 56 in IOMUX PINCM table
|
||||
// PB27 is GREEN LED2, index 57 in IOMUX PINCM table
|
||||
// PA18 is S2 positive logic switch, index 39 in IOMUX PINCM table
|
||||
// PB21 is S3 negative logic switch, index 48 in IOMUX PINCM table
|
||||
|
||||
|
||||
int main1(void){ // example scope using MKII booster
|
||||
__disable_irq();
|
||||
// Clock_Init80MHz(0);
|
||||
// Clock_Init40MHz();
|
||||
Clock_Init(OSCFREQ32MHZ);
|
||||
LaunchPad_Init();
|
||||
TExaS_Init(ADC0,5,0); //microphone
|
||||
__enable_irq();
|
||||
while(1){
|
||||
// Clock_Delay(120000000);
|
||||
// GPIOA->DOUT31_0 ^= RED1;
|
||||
}
|
||||
}
|
||||
|
||||
int main(void){ // example logic analyzer usage
|
||||
__disable_irq();
|
||||
Clock_Init80MHz(0);
|
||||
// Clock_Init40MHz();
|
||||
//Clock_Init(OSCFREQ32MHZ);
|
||||
LaunchPad_Init();
|
||||
GPIOB->DOUTSET31_0 = (BLUE | RED );
|
||||
TExaS_Init(0,0,&TExaS_LaunchPadLogic); // see TExaS.h for pin selection
|
||||
__enable_irq();
|
||||
while(1){
|
||||
for(int i=0;i<10;i++){
|
||||
Clock_Delay(Clock_Freq()/100); // 10kHz
|
||||
GPIOB->DOUTTGL31_0 = (BLUE | RED | GREEN); // clear LED2
|
||||
}
|
||||
GPIOA->DOUTTGL31_0 = RED1;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
BIN
TExaS/TExaSlogicAnalyzer.png
Normal file
BIN
TExaS/TExaSlogicAnalyzer.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 20 KiB |
BIN
TExaS/TExaSscope.png
Normal file
BIN
TExaS/TExaSscope.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 11 KiB |
BIN
TExaS/TExaSspectrumAnalyzer.png
Normal file
BIN
TExaS/TExaSspectrumAnalyzer.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 18 KiB |
67
TExaS/mspm0g3507.cmd
Executable file
67
TExaS/mspm0g3507.cmd
Executable file
@@ -0,0 +1,67 @@
|
||||
/*****************************************************************************
|
||||
|
||||
Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions
|
||||
are met:
|
||||
|
||||
Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
|
||||
Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the
|
||||
distribution.
|
||||
|
||||
Neither the name of Texas Instruments Incorporated nor the names of
|
||||
its contributors may be used to endorse or promote products derived
|
||||
from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
*****************************************************************************/
|
||||
-uinterruptVectors
|
||||
|
||||
MEMORY
|
||||
{
|
||||
FLASH (RX) : origin = 0x00000000, length = 0x00020000
|
||||
SRAM (RWX) : origin = 0x20200000, length = 0x00008000
|
||||
BCR_CONFIG (R) : origin = 0x41C00000, length = 0x00000080
|
||||
BSL_CONFIG (R) : origin = 0x41C00100, length = 0x00000080
|
||||
|
||||
}
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.intvecs: > 0x00000000
|
||||
.text : palign(8) {} > FLASH
|
||||
.const : palign(8) {} > FLASH
|
||||
.cinit : palign(8) {} > FLASH
|
||||
.pinit : palign(8) {} > FLASH
|
||||
.rodata : palign(8) {} > FLASH
|
||||
.ARM.exidx : palign(8) {} > FLASH
|
||||
.init_array : palign(8) {} > FLASH
|
||||
.binit : palign(8) {} > FLASH
|
||||
.TI.ramfunc : load = FLASH, palign(8), run=SRAM, table(BINIT)
|
||||
|
||||
.vtable : > SRAM
|
||||
.args : > SRAM
|
||||
.data : > SRAM
|
||||
.bss : > SRAM
|
||||
.sysmem : > SRAM
|
||||
.stack : > SRAM (HIGH)
|
||||
|
||||
.BCRConfig : {} > BCR_CONFIG
|
||||
.BSLConfig : {} > BSL_CONFIG
|
||||
}
|
||||
102
TExaS/targetConfigs/MSPM0G3507.ccxml
Normal file
102
TExaS/targetConfigs/MSPM0G3507.ccxml
Normal file
@@ -0,0 +1,102 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<configurations XML_version="1.2" id="configurations_0">
|
||||
|
||||
|
||||
|
||||
|
||||
<configuration XML_version="1.2" id="configuration_0">
|
||||
|
||||
|
||||
|
||||
|
||||
<instance XML_version="1.2" desc="Texas Instruments XDS110 USB Debug Probe" href="connections/TIXDS110_Connection.xml" id="Texas Instruments XDS110 USB Debug Probe" xml="TIXDS110_Connection.xml" xmlpath="connections"/>
|
||||
|
||||
|
||||
|
||||
|
||||
<connection XML_version="1.2" id="Texas Instruments XDS110 USB Debug Probe">
|
||||
|
||||
|
||||
|
||||
|
||||
<instance XML_version="1.2" href="drivers/tixds510cs_dap.xml" id="drivers" xml="tixds510cs_dap.xml" xmlpath="drivers"/>
|
||||
|
||||
|
||||
|
||||
|
||||
<instance XML_version="1.2" href="drivers/tixds510cortexM0.xml" id="drivers" xml="tixds510cortexM0.xml" xmlpath="drivers"/>
|
||||
|
||||
|
||||
|
||||
|
||||
<instance XML_version="1.2" href="drivers/tixds510sec_ap.xml" id="drivers" xml="tixds510sec_ap.xml" xmlpath="drivers"/>
|
||||
|
||||
|
||||
|
||||
|
||||
<property Type="choicelist" Value="1" id="The JTAG TCLK Frequency (MHz)">
|
||||
|
||||
|
||||
|
||||
|
||||
<choice Name="Fixed with user specified value" value="SPECIFIC">
|
||||
|
||||
|
||||
|
||||
|
||||
<property Type="stringfield" Value="1MHz" id="-- Enter a value from 100.0kHz to 2.5MHz"/>
|
||||
|
||||
|
||||
|
||||
|
||||
</choice>
|
||||
|
||||
|
||||
|
||||
|
||||
</property>
|
||||
|
||||
|
||||
|
||||
|
||||
<property Type="choicelist" Value="2" id="SWD Mode Settings">
|
||||
|
||||
|
||||
|
||||
|
||||
<choice Name="SWD Mode - Aux COM port is target TDO pin" value="nothing"/>
|
||||
|
||||
|
||||
|
||||
|
||||
</property>
|
||||
|
||||
|
||||
|
||||
|
||||
<platform XML_version="1.2" id="platform_0">
|
||||
|
||||
|
||||
|
||||
|
||||
<instance XML_version="1.2" desc="MSPM0G3507" href="devices/MSPM0G3507.xml" id="MSPM0G3507" xml="MSPM0G3507.xml" xmlpath="devices"/>
|
||||
|
||||
|
||||
|
||||
|
||||
</platform>
|
||||
|
||||
|
||||
|
||||
|
||||
</connection>
|
||||
|
||||
|
||||
|
||||
|
||||
</configuration>
|
||||
|
||||
|
||||
|
||||
|
||||
</configurations>
|
||||
9
TExaS/targetConfigs/readme.txt
Normal file
9
TExaS/targetConfigs/readme.txt
Normal file
@@ -0,0 +1,9 @@
|
||||
The 'targetConfigs' folder contains target-configuration (.ccxml) files, automatically generated based
|
||||
on the device and connection settings specified in your project on the Properties > General page.
|
||||
|
||||
Please note that in automatic target-configuration management, changes to the project's device and/or
|
||||
connection settings will either modify an existing or generate a new target-configuration file. Thus,
|
||||
if you manually edit these auto-generated files, you may need to re-apply your changes. Alternatively,
|
||||
you may create your own target-configuration file for this project and manage it manually. You can
|
||||
always switch back to automatic target-configuration management by checking the "Manage the project's
|
||||
target-configuration automatically" checkbox on the project's Properties > General page.
|
||||
200
TExaS/ticlang/startup_mspm0g3507_ticlang.c
Normal file
200
TExaS/ticlang/startup_mspm0g3507_ticlang.c
Normal file
@@ -0,0 +1,200 @@
|
||||
/*****************************************************************************
|
||||
Special MSPM0_ValvanoWare version with Hardfault handler implemented
|
||||
Jonathan Valvano 12/19/2024
|
||||
|
||||
Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted provided that the following conditions
|
||||
are met:
|
||||
|
||||
Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
|
||||
Redistributions in binary form must reproduce the above copyright
|
||||
notice, this list of conditions and the following disclaimer in the
|
||||
documentation and/or other materials provided with the
|
||||
distribution.
|
||||
|
||||
Neither the name of Texas Instruments Incorporated nor the names of
|
||||
its contributors may be used to endorse or promote products derived
|
||||
from this software without specific prior written permission.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
*****************************************************************************/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <ti/devices/msp/msp.h>
|
||||
|
||||
/* Linker variable that marks the top of the stack. */
|
||||
extern unsigned long __STACK_END;
|
||||
|
||||
/* External declaration for the reset handler that is to be called when the */
|
||||
/* processor is started */
|
||||
extern __NO_RETURN void __PROGRAM_START(void);
|
||||
|
||||
/* Forward declaration of the default fault handlers. */
|
||||
void Default_Handler (void) __attribute__((weak));
|
||||
void HardFault_Handler (void) __attribute__((weak));
|
||||
extern void Reset_Handler (void) __attribute__((weak));
|
||||
|
||||
/* Processor Exceptions */
|
||||
extern void NMI_Handler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void SVC_Handler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void PendSV_Handler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void SysTick_Handler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
|
||||
/* Device Specific Interrupt Handlers */
|
||||
extern void GROUP0_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void GROUP1_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void TIMG8_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void UART3_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void ADC0_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void ADC1_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void CANFD0_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void DAC0_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void SPI0_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void SPI1_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void UART1_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void UART2_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void UART0_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void TIMG0_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void TIMG6_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void TIMA0_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void TIMA1_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void TIMG7_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void TIMG12_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void I2C0_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void I2C1_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void AES_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void RTC_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
extern void DMA_IRQHandler (void) __attribute__((weak, alias("Default_Handler")));
|
||||
|
||||
|
||||
/* Interrupt vector table. Note that the proper constructs must be placed on this to */
|
||||
/* ensure that it ends up at physical address 0x0000.0000 or at the start of */
|
||||
/* the program if located at a start address other than 0. */
|
||||
#if defined (__ARM_ARCH) && (__ARM_ARCH != 0)
|
||||
void (* const interruptVectors[])(void) __attribute((used)) __attribute__((section (".intvecs"))) =
|
||||
#elif defined (__TI_ARM__)
|
||||
#pragma RETAIN(interruptVectors)
|
||||
#pragma DATA_SECTION(interruptVectors, ".intvecs")
|
||||
void (* const interruptVectors[])(void) =
|
||||
#else
|
||||
#error "Compiler not supported"
|
||||
#endif
|
||||
{
|
||||
(void (*)(void))((uint32_t)&__STACK_END),
|
||||
/* The initial stack pointer */
|
||||
Reset_Handler, /* The reset handler */
|
||||
NMI_Handler, /* The NMI handler */
|
||||
HardFault_Handler, /* The hard fault handler */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
SVC_Handler, /* SVCall handler */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
PendSV_Handler, /* The PendSV handler */
|
||||
SysTick_Handler, /* SysTick handler */
|
||||
GROUP0_IRQHandler, /* GROUP0 interrupt handler */
|
||||
GROUP1_IRQHandler, /* GROUP1 interrupt handler */
|
||||
TIMG8_IRQHandler, /* TIMG8 interrupt handler */
|
||||
UART3_IRQHandler, /* UART3 interrupt handler */
|
||||
ADC0_IRQHandler, /* ADC0 interrupt handler */
|
||||
ADC1_IRQHandler, /* ADC1 interrupt handler */
|
||||
CANFD0_IRQHandler, /* CANFD0 interrupt handler */
|
||||
DAC0_IRQHandler, /* DAC0 interrupt handler */
|
||||
0, /* Reserved */
|
||||
SPI0_IRQHandler, /* SPI0 interrupt handler */
|
||||
SPI1_IRQHandler, /* SPI1 interrupt handler */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
UART1_IRQHandler, /* UART1 interrupt handler */
|
||||
UART2_IRQHandler, /* UART2 interrupt handler */
|
||||
UART0_IRQHandler, /* UART0 interrupt handler */
|
||||
TIMG0_IRQHandler, /* TIMG0 interrupt handler */
|
||||
TIMG6_IRQHandler, /* TIMG6 interrupt handler */
|
||||
TIMA0_IRQHandler, /* TIMA0 interrupt handler */
|
||||
TIMA1_IRQHandler, /* TIMA1 interrupt handler */
|
||||
TIMG7_IRQHandler, /* TIMG7 interrupt handler */
|
||||
TIMG12_IRQHandler, /* TIMG12 interrupt handler */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
I2C0_IRQHandler, /* I2C0 interrupt handler */
|
||||
I2C1_IRQHandler, /* I2C1 interrupt handler */
|
||||
0, /* Reserved */
|
||||
0, /* Reserved */
|
||||
AES_IRQHandler, /* AES interrupt handler */
|
||||
0, /* Reserved */
|
||||
RTC_IRQHandler, /* RTC interrupt handler */
|
||||
DMA_IRQHandler, /* DMA interrupt handler */
|
||||
|
||||
};
|
||||
|
||||
/* Forward declaration of the default fault handlers. */
|
||||
/* This is the code that gets called when the processor first starts execution */
|
||||
/* following a reset event. Only the absolutely necessary set is performed, */
|
||||
/* after which the application supplied entry() routine is called. Any fancy */
|
||||
/* actions (such as making decisions based on the reset cause register, and */
|
||||
/* resetting the bits in that register) are left solely in the hands of the */
|
||||
/* application. */
|
||||
void Reset_Handler(void)
|
||||
{
|
||||
/* Jump to the ticlang C Initialization Routine. */
|
||||
__asm(" .global _c_int00\n"
|
||||
" b _c_int00");
|
||||
}
|
||||
// fetch the PC that triggered the hard fault
|
||||
void HardFault_Handler(void) {
|
||||
__asm(" MOV R7,SP\n" // this code prevents a hardfault within the hardfault handler
|
||||
" LDR R4,=0x20200000\n" // start of RAM
|
||||
" CMP R7,R4\n"
|
||||
" BLO fault\n" // skip if bad SP
|
||||
" LDR R5,=0x20207FE0\n" // end of RAM-32
|
||||
" CMP R7,R5\n"
|
||||
" BHI fault\n" // skip if bad SP
|
||||
" LDR R6,[SP,#24]\n" // R6=previous PC
|
||||
"fault:");
|
||||
while (1) {
|
||||
// option 1) if SP points to valid RAM (0x20200000 to 0x20207FFC)
|
||||
// then R6 has PC that caused the fault
|
||||
// option 2) if SP is not 0x20200000 to 0x20207FFC then there was a stack overflow
|
||||
// if you're here, you had a hardfault
|
||||
}
|
||||
}
|
||||
/* This is the code that gets called when the processor receives an unexpected */
|
||||
/* interrupt. This simply enters an infinite loop, preserving the system state */
|
||||
/* for examination by a debugger. */
|
||||
void Default_Handler(void)
|
||||
{
|
||||
__asm(" MOV R7,SP\n"
|
||||
" LDR R4,=0x20200000\n"
|
||||
" CMP R7,R4\n"
|
||||
" BLO dfault\n" // bad SP
|
||||
" LDR R5,=0x20207FE0\n"
|
||||
" CMP R7,R5\n"
|
||||
" BHI fault\n" // bad SP
|
||||
" LDR R6,[SP,#24]\n" // previous PC
|
||||
"dfault:");
|
||||
/* Enter an infinite loop. */
|
||||
while(1){
|
||||
// R6 has value of the PC when the interrupt was triggered
|
||||
// you are here probably because you armed an interrupt, but mistyped the ISR name
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user