89 lines
2.7 KiB
C
89 lines
2.7 KiB
C
/*!
|
|
* @defgroup PWMG6
|
|
* @brief Pulse width modulation
|
|
<table>
|
|
<caption id="PWMG6pins2">PWM pins on the MSPM0G3507</caption>
|
|
<tr><th>Pin <th>Description
|
|
<tr><td>PB6 <td>CCP0 PWM output
|
|
</table>
|
|
* @{*/
|
|
/**
|
|
* @file PWMG6.h
|
|
* @brief Pulse width modulation
|
|
* @details Hardware creates fixed period, variable duty cycle waves
|
|
* \image html PWM_100Hz.png width=500px
|
|
* @version RTOS v1.0
|
|
* @author Daniel Valvano and Jonathan Valvano
|
|
* @copyright Copyright 2026 by Jonathan W. Valvano, valvano@mail.utexas.edu,
|
|
* @warning AS-IS
|
|
* @note For more information see http://users.ece.utexas.edu/~valvano/
|
|
* @date November 24, 2025
|
|
<table>
|
|
<caption id="PWMG6pins3">PWM pins on the MSPM0G3507</caption>
|
|
<tr><th>Pin <th>Description
|
|
<tr><td>PB6 <td>CCP0 PWM output
|
|
</table>
|
|
******************************************************************************/
|
|
|
|
/*
|
|
* Derived from timx_timer_mode_pwm_edge_sleep_LP_MSPM0G3507_nortos_ticlang
|
|
|
|
*/
|
|
|
|
#ifndef __PWMG6_H__
|
|
#define __PWMG6_H__
|
|
|
|
/**
|
|
* \brief use PWMUSELFCLK to select LFCLK
|
|
*/
|
|
#define PWMUSELFCLK 2
|
|
/**
|
|
* \brief use PWMUSEMFCLK to select MFCLK
|
|
*/
|
|
#define PWMUSEMFCLK 4
|
|
/**
|
|
* \brief use PWMUSEBUSCLK to select bus CLK
|
|
*/
|
|
#define PWMUSEBUSCLK 8
|
|
/**
|
|
* Initialize PWMG6 output on PB6.
|
|
* Rising edge synchronized. timerClkDivRatio = 1.
|
|
* Once started, hardware will continuously output the waves.
|
|
* - timerClkSrc =
|
|
* - 2 for 32768 Hz LFCLK
|
|
* - 4 for 4MHz MFCLK (not tested)
|
|
* - 8 for 80/32/4 BUSCLK
|
|
* - A0/A1 is on Power domain PD1
|
|
* - 32MHz bus clock, BUSCLK clock is 32MHz
|
|
* - 40MHz bus clock, BUSCLK clock is ULPCLK 20MHz
|
|
* - 80MHz bus clock, BUSCLK clock is ULPCLK 40MHz
|
|
* - PWMFreq = (timerClkSrc / (timerClkDivRatio * (timerClkPrescale + 1) * period))
|
|
* - For example, source=LFCLK, prescale = 0, period = 1000, PWM frequency = 32.768 Hz
|
|
* - For example, source=BUSCLK, 80MHz bus, prescale=39, period = 40000, PWM frequency = 50Hz (20ms)
|
|
*
|
|
* @param timerClkSrc is 2 4 or 8
|
|
* @param timerClkPrescale divide clock by timerClkPrescale+1, 0 to 255
|
|
* @param period sets the PWM period
|
|
* @param duty sets the duty cycle on PB6
|
|
* @return none
|
|
* @note Will call LaunchPad_Init to reset and activate power
|
|
* @see PWMG6_SetDuty
|
|
* @brief Initialize PWMG6
|
|
*/
|
|
void PWMG6_Init(uint32_t timerClkSrc, uint32_t timerClkPrescale,
|
|
uint32_t period, uint32_t duty);
|
|
/**
|
|
* Set duty cycles on PB6.
|
|
* @param duty sets the duty cycle on PB6 (high time)
|
|
* @return none
|
|
* @note assumes PWMG6_Init was called
|
|
* @see PWMG6_Init
|
|
* @brief Set duty cycles
|
|
*/
|
|
void PWMG6_SetDuty(uint32_t duty);
|
|
|
|
|
|
#endif // __PWMG6_H__
|
|
/** @}*/
|
|
|